Canon Pixma MP170 - Quick Start Guide [antikvár]

> Preparing the machineUnpack the machinePlease confirm bundled thing by the illustration printed on the flapped lid of the packing box.^ IMPORTANTDo not connect the USB cable until after the software is installed.A printer cable is not included. You must purchase a USB cable (less than 10 ft. / 3 m) to connect your machine to a computer.1Turn ON the machine.The language setting is only available for some countries.If you have an undesired language selection, refer to the User's Guide.2Prepare the FINE Cartridges (ink cartridges).If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center.Do not reattach the Protective Tape once you have removed it.3Install the FINE Cartridge.Ensure that all the FINE Cartridges are installed in the order directed by the label. The machine cannot be used unless all the FINE Cartridges are installed.For safety reasons, store FINE Cartridges out of the reach of small children.Do not drop or shake FINE Cartridges as this may cause the ink to leak out and stain your clothes and hands.The Alarm Lamp still lights orange if a FINE Cartridge is not installed properly. Open the Scanning Unit (Printer Cover) and make sure that all the FINE Cartridges are installed in the correct order directed on the label.